Men's Synthetic Mountain Trekking Padded Jacket - MT50 0°C
Store Availability
Store Availability
BENEFITS
Easy maintenance
This padded jacket filled with wadding is easy to machine wash. quickdrying
Warmth
Comfortable in temp between 10°C and 0°C. Wadding with good fill power (100g/m2)
Weight
This padded jacket weighs approximately 400 g in size L
Pockets
2 zipped pockets for securing your belongings
User comfort
Protective tab on the zip of the stand-up collar at the chin
TECHNICAL INFORMATIONS
Thermal insulation
This padded jacket, when worn as a 3rd layer, has a temperature rating of 0°C that was certified during a standardised test in a thermal chamber. The model is wearing a synthetic long-sleeved T-shirt and a light fleece underneath. It works with a simulated 5 km/h wind. In our heat comparison tool, this is equivalent to 1 star.
We have also tested this model in static mode. Its temperature rating is +10°C in this case.
Technical information on the wadding
We use a 100% polyester wadding: 100 g/sqm in the body section and 60 g/sqm in the sleeves.
Our advice in the event of rain
The material of the quilted jacket is water repellent. This means that drops of water roll off the fabric preventing them from soaking into the padded jacket as quickly, giving you time to find some shelter. But the padded jacket is not waterproof. We therefore recommend wearing a waterproof jacket over the down jacket in the event of prolonged exposure to rain.
Water repellent property of component (not to be confused with waterproofing)
The water repellent property of a fabric is its ability to make water run off its surface without absorbing it. This prevents the fabric from swelling, and keeps it lightweight and warm. The fabric of this down jacket is water repellent, however, we recommend that you wear a waterproof jacket over it in the rain. The fabric is made water-repellent by treating (PFC-free) its outer surface, however this property may deteriorate with use. We recommend that you restore it after each wash.
How to restore the water-repellent properties?
Once you have cleaned your padded jacket, we recommend you use a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water repellent properties and optimises its performance throughout the lifespan of your garment.
The benefits of synthetic wadding
Synthetic filling is a useful alternative to feathers:
- It has good thermal insulation capacity, even when wet
- It provides greater breathability and may be recommended in the case of dynamic activity (feather down is recommended for static activity)
- Easy care: machine wash at 30°C and tumble dry
A snag? This is how to repair your down jacket
A tear on a padded jacket can happen when trekking! The good news is that it can be repaired with a repair patch to prevent the tear from getting bigger or the synthetic fibres from escaping.
Don't you feel at ease carrying out this repair yourself? Don't worry! Some Decathlon workshops offer an in-store repair service to mend your padded jacket using a heat-bonded patch.
composition
composition
Main fabric: 100.0% Polyester; Main lining: 100.0% Polyester; Filling: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store this padded jacket on a hanger or folded in a clean, dry place.
Restrictions on use
Do not use in the rain.
TESTS AND WARRANTY
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 28% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
ProcessDope dyed
Product made from 42% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
-
ProcessGreige (undyed)
Product made from 1% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 58% compared to conventional dyeing.
-
Material
Recycled polyamide
Product made from 1% recycled polyamide
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 30%.