100 1/2 PERSON TOURING INFLATABLE KAYAK - GREEN
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Inflation in 7 minutes to a maximum pressure of 1.5 psi (0.1 bar)
Glide performance
The patented bow shape gives the kayak good glide performance. 3 keels.
Capacity
For 1 to 2 people, up to a maximum of 150 kg (331 lbs).
Stability
Side tubes and a wide inflatable floor for good stability.
User comfort
Raised seat for comfort when at rest and when paddling.
Instructions
DownloadTECHNICAL INFORMATIONS
Inflation recommendations & precautions
Inflate the floor, then one of the side tubes, then the second one to 50%. Check the overall positioning of the chambers. Then fully inflate it without exceeding 0.1 bar (1.5 psi).
DO NOT OVERINFLATE!
Close the valves well.
Install the 3 keels, unless using on a river containing little water.
In the event of EXTREME HEAT, slightly deflate the kayak out of the water to avoid overinflation, which could damage the kayak.
Do not leave inflated in direct sunlight: risk of overinflation.
Care instructions
In the event of damage to one of the side chambers, open the side tube lengthways using the zip and remove the chamber.
The floor can be uncovered by opening the hook and loop fastenings.
Example 1: the hole is in the side tube; you can use the repair kit to stick on a patch.
Example 2: the hole is located along a seam; visit the workshop of a DECATHLON store to repair or exchange the bladder.
Easy to disassemble and fold
New carry bag, backpack style for short distances.
Easy clip fins.
Deflate the kayak by opening the 3 "Boston" valves.
Fold the lateral tubes down onto the floor.
Roll, starting from the opposite side to the valves to remove the air.
Place the rolled-up kayak into the main compartment of the bag.
Close the zip and tighten using the compression strap.
Seat comfort
The seats are high, providing increased comfort for adults in the paddling position.
The seats are to be placed according to the number of persons on board, just behind of the markings printed on the floor.
On the "2" markings (which therefore remain visible) when there are 2 persons on board. On the "1" marking when there is only one person on board.
Ensure that you balance your load to optimise kayak performance.
Glide performance
Patented bow shape: the front and back ends provide good glide. The V-shaped front of the kayak enables smooth entry into the water.
Technical dimensions and weights.
INFLATED SIZE
Length: 340 cm
Width: 103 cm
FOLDED & BAGGED SIZE
Height: 67 cm
Width: 44 cm
Thickness: 30 cm
Weight: 14 kg
Maximum pressure: 0.1 bar (1.5 PSI)
Number of seats: 1 or 2 seats
Content: kayak, bag, repair kit, skeg
PADDLE NOT INCLUDED
PUMP NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters
After-sales service
Spare parts are available for Itiwit kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.
Inflatable floor: reference 8390990
Left bladder: reference 8309264
Right bladder: reference 8309167
Directions for use.
We recommend that you use the product with a buoyancy life vest.
regulations for canoes-kayaks measuring less than 3.50 metres
Is your canoe-kayak inflatable or rigid and is less than 3.5 metres? You have what is called a beach craft.
You must always stay 300 metres from a shelter (any place on the coast where any boat or vessel and its crew can get to safety by anchoring or berthing and leave without assistance).
Buoyancy aids are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.
More than 3.5 metre canoe-kayak rules
Your canoe-kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.5 metres. It is "sea approved" by the manufacturer.
You can paddle up to 2 nautical miles (approx. 3 km) from shore. You will need a number of safety features.
You can find these elements using this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak
composition
composition
Main fabric: 100.0% Polyester; Floor mat: 100.0% Polyvinyl Chloride
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry, deflate, fold up. Store in a cool, dry place.
Restrictions on use
Paddling up to 300 metres from shelter.
TESTS AND WARRANTY
Agree by
ISO 6185-1 standard. Category IIIB (beach craft) Complies with French Division 240 regulations (sailing up to 300 m from shelter)
Parts guarantee
Guaranteed availability of spare parts essential to use of product: 2 years Availability: 10 years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Long lastingRepairability
Product designed to be repairable on more than 80% of breakages and failures.
Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.