X100 11FT TOURING INFLATABLE STAND-UP PADDLEBOARD - BLUE
Store Availability
Store Availability
BENEFITS
Compact design
Dimensions folded in the bag (96 x 40 x 16 cm). Inflates to 15 PSI in 6 minutes.
Easy transport
10.5 kg. Easy to carry to water for launching, or in a backpack.
Robustness
Robust and impact-resistant glued dropstitch & PVC construction.
Weight
Suitable for up to 2 people. Maximum load: 320 kg
Carrying comfort
New bag with foam lining on the shoulders opens flat easily.
Stability
Very wide (34") and thick (6") for stiffness and maximum stability.
User comfort
Foam deck for comfort and grip. EVA foam handle
Instructions
DownloadTECHNICAL INFORMATIONS
Recommended user weight Maximum load
Recommended user weight:
Less than 60 kg: ultra-stable board.
60 to 80 kg : very stable board.
Over 80 kg: ideal board for easily starting out.
Maximum load: 320 kg.
Inflating and deflating the stand-up paddle board
INFLATION:
Check the valve’s orange button is up (closed), by pressing on it.
Connect the pump.
Inflate to 15 psi.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
DEFLATION:
Firmly push the valve’s orange button to let the air out.
Do not put your face near and stay back.
Roll, starting from the opposite side to the valve to remove all the air.
Safe storage
Don't expose your board to direct sunlight out of the water.
If your board must stay in the sun, we recommend you store it away from any heat sources (walls, the ground, car roofs, etc.) and reduce the pressure to10 psi to avoid excessive pressure and irreversible damage (explosions, detachments, leaks, etc.).
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8403374
Remember to remove the fin once you get off the water.
If possible, rinse the fin base before and after use.
Start folding up from the fin base, following the dotted lines to avoid damaging the base.
Maintenance tool
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Technical dimensions
INFLATED SUP:
Length: 11' (335.5 cm)
Width: 34" (86.5 cm)
Thickness: 6" (15 cm)
Volume: 335 litres
Weight: 10.5 kg (+/- 10%)
BAG CONTAINING THE FOLDED SUP:
Height: 97 cm
Width: 40 cm
Thickness: 20 cm
These dimensions leave space for the pump and paddle.
Repair
We have a stand-up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
Leash
Always wear your leash to stay attached to your board if you fall. It’s best to attach it to your ankle, but it can also be attached to the knee.
Remove it and rinse after each use.
Practical for sailing
The inflatable SUP is very practical for sailing. It can be attached using the lines without obstruction or damage to the deck. It is easy to launch thanks to its leash. It allows users to paddle around anchored boats. A great sporty tender for adults and kids.
Always dry
Its 6” thickness (height on water) keeps you dry when paddling on calm water.
Yoga
Perfect for doing YOGA in natural areas without getting wet thanks to its stability and height on the water.
Bag contents
Board
Fin
Leash
User guide
Repair patch
Valve tightening tool (use only with the SUP deflated)
Recommendations for use
We recommend the use of a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)
composition
composition
Main fabric: 70.0% Polyvinyl Chloride, 30.0% Polyester; Foam: 25.0% Ethylene Vinyl Acetate, 75.0% Polyethylene; Carry bag: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.
TESTS AND WARRANTY
Parts guarantee
Availability of spare parts: 10 years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Long lastingRepairability
Product designed to be repairable on more than 80% of breakages and failures.
Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.