Hiking backpack 10L - NH Escape 150 Square
Store Availability
Store Availability
BENEFITS
Capacity
Volume: 10 litres | Weight: 460 g | Size: 37 x 25 x 10 cm
Abrasion resistance
Abrasion-resistant component (lower back) | 10-year warranty
Multiple compartments
1 main compartment with a flap and magnetic buckle closure
Carrying comfort
Padded shoulder straps 10mm | 2 thumb loops | 2 ergonomic handles
Pockets
2 zipped pockets |2 water bottle holders|1x13" laptop pocket|1x10" tablet pocket
Ventilation
2 thick mesh pads for ventilating the back | Ventilated shoulder straps
TECHNICAL INFORMATIONS
WATERPROOFING
The components of the bag are water-repellent so that you can temporarily continue walking/hiking in light rain.
Caution: this backpack is not watertight/waterproof and it does not have a rain cover.
If you want to continue walking/hiking in the rain and protect your belongings, we recommend the following model: "10 to 20 L rain cover", which can be viewed on our website, item reference 8772113.
How is the volume measured?
The volume of each backpack is measured using a standard method: we fill the main compartment, as well as each pocket, with little balls. We then empty these balls into a graduated container, which gives the equivalent volume in litres.
How to adjust your backpack?
1 - Loosen the straps
2 - Put on the loaded backpack
3 - Tighten the straps
How to fill your backpack?
Put heavy belongings on the bottom. Store your clothing around these items. Keep your waterproof jacket and/or sweater to hand. Place small items that you use every day (sun cream, map, glasses, etc.) in the pockets. The flask can be placed in the side pockets designed for this.
Tested for optimal robustness
We carry out several laboratory tests to validate the bag's components: fabric, buckles, straps, foam, zips. For example, for a fabric, we test the resistance to abrasion and tearing, colour fastness when exposed to UV light and washing, as well as waterproofing. We also carry out tests to check assembly robustness with the help of a dummy which reproduces a hiker’s movements to show several years of wear on the bag.
composition
composition
Main fabric: 20.0% Polyamide, 80.0% Polyester; Lining: 100.0% Polyester; Coating: 100.0% Polyurethane; Foam part: 100.0% Foamed Polyurethane
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your backpack in a dry place.
Restrictions on use
non-waterproof component. Use a cover (not included).
TESTS AND WARRANTY
Test product
It’s in France, at the foot of Mont Blanc, that our design team conceives, designs and creates Quechua products. We test them in the field with other hikers to make sure that they are comfortable and robust. Brittany, Corsica, Reunion Island, etc. We go to as many different places as possible, in all weather conditions. Great conditions for discussion, which is precious to gain your feedback and plan ahead for new products!
Warranty
10 Years
Agree by
This bag has been tested and approved by around thirty test hikers. To meet your requirements, Quechua products are tested out in the heart type of conditions you may encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 25% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
ProcessBiton
Product made from 14% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 60% compared to conventional dyeing.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 33% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.