Baby UV-protection short sleeve T-shirt - Coral
Store Availability
Store Availability
BENEFITS
Easy dressing
Press studs at the back of the collar to easily get it on over the head.
Chlorine resistance
Recommended for occasional use, up to 100 hours of activity.
Sun protection
UPF 50+ fabric. Sun protection even when wet. Blocks at least 95% of UV rays.
Limits sand entering
The textile mesh prevents retention of grains of sand
TECHNICAL INFORMATIONS
PROTECTION FOR KIDS
Baby's skin is very sensitive to the sun, because infants' defence systems only become effective after the age of 3. For identical exposure, the effects of the sun are 2 to 3 times stronger on a child than on an adult. It is therefore important to protect them effectively.
WHAT DOES UPF 50+ MEAN?
UPF is a sun protection factor (Ultra Violet Protection Factor) and is standardised worldwide.
It defines the protection level of a fabric and more precisely the proportion of UV rays it lets through.
To meet the standards, it must block at least 95% of UV rays. UPF 50+ means that the fabric blocks at least 95% of UVA and 98% of UVB rays.
BEHAVIOUR IN THE SUN?
Although this UV-protection T-shirt provides protection from the sun, other factors such as reflections (from water, sand, etc.), heat, time of day, and so on, must be taken into account. Wearing this T-shirt does not exempt the wearer from following the relevant advice: wear sunglasses, regularly apply suitable sun cream, wear a hat, stay hydrated, etc.
composition
composition
Main fabric: 18.0% Elastane, 82.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
Only body parts covered by UV-protection T-shirt are protected.
TESTS AND WARRANTY
Test product
UV-protection T-shirt developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality.
Warranty
2 Years
Agree by
All of our sun protection components are laboratory-tested by our engineers. They meet the current standard: EN 13758-2. We conduct tests on all of the materials used before starting production. We also have our own measuring equipment in our laboratories to supplement the tests conducted in external laboratories. The products are laboratory-tested when wet and dry, as well as in use.