LURE FISHING BRAIDED LINE TX4 KHAKI 130M
Store Availability
Store Availability
BENEFITS
Glide performance
Weaving 4 strands with a coating making it possible to cast a long way
Breaking resistance
This 4 strand UHMPE braid has a significant diameter to breaking strain ratio
Visual efficiency
The dope dyed fibres retain their colour for a long time
TECHNICAL INFORMATIONS
DURABILITY AND PACKAGING OF THE BRAIDED LINE TX4
130 metre spool
Ø: 12/100 - 5.9 kg - 13 lb
Ø: 16/100 - 9.3 kg - 20.6 lb
Ø: 18/100 - 11.2 kg - 24.7 lb
Ø: 20/100 - 15 kg - 33.1 lb
Ø: 25/100 - 17.5 kg - 38.5 lb
Ø: 30/100 - 23 kg - 50.7 lb
Ø: 35/100 - 26 kg - 57.3 lb
This braid is also available in KHAKI in 300 metre packs (in specific diameters) and for the 130 metres in CHARTREUSE GREEN.
Reference 8677252 TX4 130 M KHAKI
Reference 8677251 TX4 300 M CHARTREUSE GREEN
ADDITIONAL SUSTAINABLE DEVELOPMENT INFORMATION
Dyeing the braids requires a large amount of water and also releases used water from the dyeing baths.
We opt for the dope dying process of the strands, incorporating the colour pigments at the manufacturing stage. The weaving is thus carried out in the second stage.
RECOMMENDATIONS
We recommend you use different connector knots according to the diameters you wish to connect your braided line and fluorocarbon:
- Grinner Double knot to connect similar diameters
- FG or Albright knot to connect highly disparate diameters
composition
composition
Carrier: 100.0% Polystyrene; Line for fishing: 100.0% Polyethylene
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Warranty
2 Years
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope Dyed
Colour made by dyeing polyester chips, using less water than traditional methods
Dyeing textiles requires lots of water, whilst also generating water waste from the dyeing vats. To reduce the environmental impact this has, we have chosen solution dyeing, which integrates colour pigments when manufacturing the thread. This uses less water and therefore also leads to less water wastage.