Unisex Running 2x250ml Bottle Hydration Belt - KIPRUN Belt 500
Store Availability
Store Availability
BENEFITS
Ease of use
Tip: Gain easy access to all the pockets by tilting the belt.
Easy hydration
2 x 250ml water bottles including a large valve for easy hydration.
Pockets
2 bar/gel pockets 1 zipped smartphone/key pocket 1 pocket for a wind jacket.
Stability
Rigid waist belt that can be easily adjusted to stop it bouncing
TECHNICAL INFORMATIONS
No need for any safety pins!
Belt equipped with two clips for fastening your race number on the day of the race.
One size
Belt that covers the sizes from 2XS to 2XL (measured at the hip)
Weight
Belt with 2 water bottles = 195g
Belt alone = 135g
Water bottle = 30g per bottle
How to maintain the water bottle
Clean the flask properly after each use.If you use isotonic drinks, rinse all the components of the flask body, lid and mouthpiece thoroughly to make sure that no liquid remains.Use washing-up liquid and a bottle brush to thoroughly clean the bottom of the flask.Then let it dry out completely and store it without the lid on to allow the flask to air properly.If not, you might get mould inside the flask.
Do not put in the dishwasher (especially at >70°C).
composition
composition
Secondary lining: 100.0% Polyester; Water pouch: 94.0% Polypropylene, 6.0% Silicone; Main fabric: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
The water bottles are not suitable for fizzy drinks.
TESTS AND WARRANTY
Test product
This belt has been tested and approved under running conditions.
Warranty
2 Years