100 Men’s UV Protection Surfing Leggings - Slate Blue
Store Availability
Store Availability
BENEFITS
Reduced chafing
Reduces rubbing against the board.Tested for one-hour sessions.
Quick drying
Quick-drying synthetic polyester material.
Sun protection
UPF 50+ fabric. Blocks at least 95% of UV rays, even when wet.
Resitant to impact of waves
Body-hugging waistband. Tie to attach to a T-shirt. Support in waves.
Easy maintenance
The textile mesh prevents grains of sand from getting stuck.
TECHNICAL INFORMATIONS
UV protection even when wet.
The fabric of this OLAIAN anti-UV product blocks at least 98% of UVB radiation and 95% of UVA (UPF 50+). This guarantees effective protection from the sun. It can be used both in and out of the water, for water or nautical sports.The density of the textile fibres filters out UV rays, for long-lasting protection, even after washing. Caution: the elastane contained in the fibre may deteriorate in chlorinated water.
What does UPF 50+ mean?
UPF is a sun protection factor (Ultra Violet Protection Factor) and is standardised worldwide.
It defines the protection level of a fabric and more precisely the proportion of UV rays it lets through. To meet the standards, it must block at least 95 % of UV rays. UPF 50+ means that the fabric blocks at least 95% of UVA and 98% of UVB rays.
Reduced chafing
These leggings help reduce rubbing against the board, especially around the knees when lying down on the board and inside the thighs when sitting on the board. We have tested and ensured that irritation is significantly reduced during one-hour sessions.
Support and stability waves
The body-shaping waistband helps the leggings stay in place even when you fall off the board in the waves. The cord located at the front of the waistband is designed to be attached to a UV protection T-shirt and prevent it from riding up. We recommend wearing a 500 UV protection T-shirt (available in short sleeve and long sleeve versions and with a hood) in addition to these leggings in order to be well protected.
Warmth and wind
The minimum water temperature recommended for the use of these anti-UV leggings is 22°C. Air temperature may increase or decrease this recommendation. Our thermal models (over 2 hours) are made of fleece and neoprene. The presence of wind can have an impact which can be uncomfortable as soon as the wind exceeds 15 km/h: In this case, choose a model with neoprene.
Multi-watersports UV protection leggings
Our anti-UV leggings are designed to meet the needs of the most demanding surfers. Our design choices also make them compatible with other watersports such as swimming, kite surfing, windsurfing, wakeboarding, water skiing, sea wading or SUP (stand up paddle boarding).
Behaviour when in the sun
Although these leggings protect you from the sun, phenomena such as reflections (from water, sand, etc.), heat, time of day, etc. must be taken into account. Wearing these leggings does not exempt the wearer from following the relevant advice: wear a UV protection T-shirt, wear sunglasses, wear a hat or cap, regularly apply an appropriate sun cream, drink regularly, etc.
Sun protection
https://www.olaian.fr/conseils/la-protection-solaire-en-surf-tp_3890
What is the OLAIAN brand?
OLAIAN, DECATHLON'S SURFING BRAND
Based in Hendaye, in South West France, OLAIAN is Decathlon's surfing brand. In our offices at the water's edge, we can design a product made for surfing and then on the same day test it directly in real practice conditions
composition
composition
Main fabric: 15.0% Elastane, 85.0% Polyester; Lining: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
Water > 22°C. Sun protection even when wet. Filters 95% of UV.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality.
Warranty
2 Years
Agree by
All of our sun protection components are laboratory-tested by our engineers. They meet the current standard: EN 13758-2. We conduct tests on all of the materials used before starting production. We also have our own measuring equipment in our laboratories to supplement the tests conducted in external laboratories. The products are laboratory tested when wet and dry as well as in use whilst worn (with the stretch that occurs during use).