Women’s Hiking Boots - NH500 Mid Leather WP
Store Availability
Store Availability
BENEFITS
Lightweight
Each boot weighs 350 g in size 6.5
Robustness
Leather forefoot insert to resist abrasion in the wild
Traction
Sole design and 4 mm spike clears mud easily
Grip
Sole composition & design encourages grip on walking trails
Cushioning
EVA midsole guarantees comfortable cushioning
Fitting comfort
Soft collar and no seams at the heel for foot comfort
Waterproof
Waterproof, breathable membrane | Tested for a 6-hour hike in the rain
Foot support
High upper, lacing with 12 eyelets and 4 metal hooks for support
TECHNICAL INFORMATIONS
How is the comfort of the NH500 MID LEATHER WP hiking boots determined?
Our nature hiking boots promise one thing, and that’s heightened comfort for the wearer. to this end, we have included different ingredients in this boot to take care of your feet such as the EVA foam midsole and insole (ethylene vinyl acetate), or the neck of the boot (top heel section) which includes a synthetic foam for greater comfort when worn.
We have also eliminated the seams in the heel area to avoid any discomfort.
How is the durability and solidity of the NH500 MID LEATHER WP hiking boots determined?
Laboratory tests were conducted to test the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
These tests allow us to improve the quality of our products and prevent premature wear of our hiking shoes.
What gives the soles of the NH500 LOW hiking boots so much grip on hiking trails?
The sole’s design is the result of long research carried out in our labs. It is composed of a specific rubber formula which optimises grip and traction. We are always looking for the best solution to progress on loose or mineral (forest or coastal) walking trails.
When used on roads, this can lead to the premature wear of your boots and cause discomfort. They are not suitable for high mountain walking.
Which pair of socks should you wear with the NH500 MID LEATHER WP hiking boots?
These shoes are slightly breathable but not enough to wick away all humidity created by your perspiration. We recommend you choose Hike 100 Low or Mid socks. they contain moisture-absorbing cotton and have a reverse terry-knit construction under the sock that wicks moisture away from your foot. They are also high enough to protect your ankle from the shoe. It is an excellent combination to reduce the chance of blisters.
What is the waterproofing performance of these NH500 MID LEATHER WP boots?
We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half submerged in water. We also conducted field tests to measure wear and ageing. During the waterproofing laboratory test, we test 3 levels of waterproofness: 2000 flexes (30 minutes’ walking), 10 000 flexes (3-hour hike) and 30 000 flexes (6-hour hike). This model of boot has been tested for up to 30000 flexes, which is equivalent to 6 km of walking.
How to look after the NH500 MID LEATHER WP hiking boots?
- Leave to air dry.
- Remove dry mud with a stiff brush.
- For stains, clean with a brush and a little lukewarm water.
- Air dry.
- Use a re-waterproofing spray (product ref. 8677748) to restore water-repellency to the upper.
composition
composition
Outer sole of: 50.0% Synthetic Rubber, 50.0% Ethylene Vinyl Acetate; Upper of: 50.0% Polyester, 50.0% Leather; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We recommend you store your boots in a dry, dark and, if possible, ventilated place away from any heat source.
Restrictions on use
Do not use on hilly terrain or on tarmac.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: - Body shape (mainly using 3D analysis); - Science of movement; - Thermal comfort (with its four climatic chambers); - Behavioural and sensory sciences. This hiking boot has been tested for its waterproofing and comfort when walking.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested out in the heart of nature in the type of conditions you may encounter during your hikes. Our teams, as well as a panel of testers (made up of partners, ambassadors and customers), test the products throughout their development right up until they are marketed.
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 4% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 8% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
Process
Dope dyed
Product made from 4% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
-
Material
Recycled polyester
Product made from 8% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
MaterialRecycled Polyurethane
Product made from 4% recycled polyurethane
Using recycled polyurethane rather than conventional polyurethane reduces the CO2 emissions linked to the material by at least 9%.
-
Material
Recycled polyester
Product made from 8% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
Material
Recycled Polyurethane
Product made from 4% recycled polyurethane
Using recycled polyurethane rather than conventional polyurethane reduces the CO2 emissions linked to the material by at least 9%.
-
MaterialRecycled rubber
Product made from 6% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 8%.
-
Material
Recycled Polyurethane
Product made from 4% recycled polyurethane
Using recycled polyurethane rather than conventional polyurethane reduces the CO2 emissions linked to the material by at least 9%.
-
Material
Recycled rubber
Product made from 6% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 8%.
-
Material
Recycled rubber
Product made from 6% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 8%.